| Session 2: Modern cast and wrought magnesium alloys: development, research, corrosion protection, and application
|
 |
| November 29, Tuesday |
| |
| Sub-session 1 |
| Chairman: Karl Kainer, GKSS-Research Center, Germany |
| |
| 14.30-14.50 |
The research and development of magnesium alloys for automobile industry.
Vladislav Tetuchin, Natalia Paderina, Vadim Agalakov - VSMPO-AVISMA Corporation, Russia
|
| 14.50-15.10 |
The analysis of the current status and prospects of wrought magnesium alloys.
Ekaterina Volkova - All-Russian Scientific Research Institute of Aviation Materials (VIAM), Russia
|
| 15.10-15.30 |
New magnesium alloys for powertrain components.
Boris Bronfin, N. Moscovitch - Dead Sea Magnesium Ltd, Israel
|
| 15.30-15.50 |
The technology of semi-products manufacture form new structural materials based on the granular Magnesium alloys.
Nikolay Shanin - JSC Metagran research-and-production enterprise, Russia
|
| 15.50-16.15 |
Q&A Session
|
| 16.15-16.45 |
Coffee-break
|
| Sub-session 2 |
| Chairman: Rustam Kaibyshev, Ufa Aviation Technical University Dept. of Materials Science, Russia |
| |
| 16.45-17.05 |
Design, research and application of magnesium alloys in Hydro Magnesium programs.
Jo Willekens, Christoph Schendera - Hydro Magnesium Marketing GmbH, Germany
|
| 17.05-17.25 |
Residual stresses characterisation by X-ray diffraction of AZ91magnesium alloy,welded by laser processing.
Àfia Kouardi, Laurent Barrallier - Mecasurf Team, ENSAM, France
|
| 17.25-17.45 |
Magnesium alloys with magnetic properties.
Friedrich-Wilhelm Bach, Mirco Schaper, Martin Bosse, Grygory Gershteyn - Institute of Materials Science, University of Hannover, Germany
|
| 17.45-18.05 |
Properties, structure and phase equilibria in Mg-Rare Earth systems
Lazar L. Rokhlin - Baikov Institute of Metallurgy and Materials Science, Russia
|
| 18.05-18.25 |
Development of Mg-Al-Zn alloyed sheets and plates.
Yakov Solomonik, Yuri Sigalov, Efim Kaputkin - All-Russia Institute of Light Alloys, Russia
Fedor Elkin - Alusil-MVT, Russia
|
| 18.25-18.50 |
Q&A Session
|
|
| November 30 , Wednesday |
| |
| Sub-session 1 |
| Chairman: Mirco Schaper, University of Hannover, Germany |
| |
| 10.00-10.20 |
Investigation on Microstructure of Mg-Sr Master Alloy and its Application to AZ91 alloy.
Peng Xiaodong, Chen Gang, Liu Xiangguo, Xie Weidong, Xu Songbing, Pan Fusheng - College of Mechanical Engineering, Chongqing Engineering Research Center for light alloys, Chongqing University, China
|
| 10.20-10.40 |
The main methods to increase the wrought magnesium alloy plasticity.
Fedor Elkin - Alusil-MVT, Russia
|
| 10.40-11.00 |
Improvement of Properties of Mg Alloys by Equal Channel Angular Pressing.
Yuri Estrin - Clausthal University of Technology, Germany
|
| 11.00-11.20 |
Bulk nanostructural magnesium alloys for structural applications.
Ruslan Valiev - Ufa Aviation Technical University, Russia
Dobatkin, Lazar Rokhlin - Baikov Institute of Metallurgy and Materials,Russia
|
| 11.20-11.50 |
Q&A session
|
| 11.50-12.30 |
Coffee-break
|
| Sub-session 2 |
| Chairman: Lazar Rokhlin, Baikov Institute of Metallurgy and Materials Science, Russia |
| |
| 12.30-12.50 |
Superplasticity – the advanced technology of magnesium semis production.
Rustam Kaibyshev, Artur Galiev - Ufa Aviation Technical University, Russia
|
| 12.50-13.10 |
Superplasticity of magnesium alloys produced by intensive plastic deformation methods.
Vladimir Chuvildeev - Nizhny Novgorod State University named after N. Lobachevsky, Russia
|
| 13.10-13.30 |
Hydrostatic extrusion of magnesium alloys at 100°C and its influence on grain refinement and mechanical properties.
Jacek Swiostek, Dietmar Letzig, Karl-Ulrich Kainer - GKSS-Research Center, Germany
|
| 13.30-13.50 |
Optimized rolling process for deep-drawing sheets made of different magnesium wrought alloys.
Prof. Friedrich-Wilhelm Bach, Dr.-Ing. Mikhael Rodman, Dipl.-Ing. Arne Rossberg - University of Hannover, Germany
Prof. Jury Zilberg - National Metallurgical Academy of Ukraine, Ukraine
|
| 13.50-14.15 |
Q&A session
|
| 14.15-16.00 |
Lunch
|
| Poster Session |
| |
| 15.35-16.00 |
Variations of Alloying Elements during Hot Chamber Die Casting Process.
Keun Yong Sohn, Min Cheol Kang, Kyung Hyun Kim - Korea Institute of Machinery and Materials, South Korea
|
| Sub-session 3 |
| Chairman: Peng Xiaodong, Chongqing University, China |
| |
| 16.00-16.20 |
New generation of Keronite process for corrosion protection of magnesium.
Stephen Hutchins, Pavel Shashkov, Suman Shrestha - Keronite Ltd, UK
|
| 16.20-16.40 |
Microstructure and corrosion behavior of Mg-Zn-Ag alloy.
A. Kaya, D. Eliezer, O. Golan - TUBITAK MAM, Materials Institute, Kocaeli, Turkey
G. Ben-Hamu - Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva, 84105, Israel
Y.G. Na è K.S. Shin - School of Materials Science and Engineering, Seoul National University, Seoul 151-742, Korea Affiliated with CAAM, POSTECH, Pohang 790-784, Korea
|
| 16.40-17.00 |
New surface treatment technologies for magnesium.
Ilya Ostrovsky - Advanced Magnesium Technologies & Solutions, Israel
|
| 17.00-17.20 |
Corrosion and Oxidation of Mg-Y-RE-Zr Alloy.
A.A. Kaya - TUBITAK MAM, Materials Institute, Kocaeli, Turkey
G. Ben-Hamu, D. Eliezer, S. Cohen - , Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva, 84105, Israel
K. S. Shin - School of Materials Science and Engineering, Seoul National University, Seoul 151-742, Korea Affiliated with CAAM, POSTECH, Pohang 790-784, Korea
|
| 17.20-18.00 |
Q&A session
|
|
